REP3BUP001191R1 ABB
Extension XC 08 L1
An external 24 V DC power supply has to be used if the total current exceeds the capacity of the 24 V DC power supply of the basic unit. In this case, it is necessary to connect together the 0 V and 24 V DC of the external power supply and basic unit.
If the external power supply is not connected, the supply led (green) is blinking.
Warning: In the case of the terminal 0 V is disconnected and in the same time the 24 V DC is connected, the leakage current on output is 16 mA.
Extension XO 16 N1
The 24 V DC power supply used for the loads should be linked to the 0 V or 24 V DC terminals situated on the top or bottom terminal blocks. These terminals are linked internally, therefore it just requires linking one 0 V and one 24 V DC terminals
Warning: In the case of the terminal 0 V is disconnected and in the same time the 24 V DC is connected, the leakage current on output is 16 mA.
CI867K01
07AC91
07AC91D
07DC91C
07KR31
IMASI02
IMASI03
IMASI13
IMASI23
IMASM03
IMASO01
IMASO11
IMBLK01
IMCIS02
IMCIS12
IMCIS22
IMCOM03
IMCOM04
IMCPM02
IMDSI02
IMDSI12
IMDSI13
IMDSI22
IMDSM04
IMDrSM05
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,