REF3BUP001191R1 ABB
Warning: In the case of the terminal 0 V is disconnected and in the same time the 24 V DC is connected, the leakage current on output is 16 mA.
Cabling the digital central extensions
The extensions are powered with 5 V by the basic unit or the remote unit. The connection between the extension and the basic unit is effectuated with the cable situated on the left side of the extension.
Warning: The extensions must be connected or disconnected without power supply.
Extension XI 16 E1
The 24 V DC power supply used for the sensors should be linked to the 0 V and 24 V terminals situated on the top or bottom terminal blocks. These terminals are linked internally, therefore it just requires linking one 0 V and one 24 V DC terminals.
Extension XO 08 R1
The connection terminals named C1 and C2 are independent.
07KR51 220VDC
07KR51 24VDC
07KT97B
07KT97F1
07KT98
07KT98 H4 GJR5253100R3260
07KT98 H4 GJR5253100R3262
086318-002
086329-003
086329-004
086339-001
086345-004
086345-504
086348-001
086349-002
086351-004
086370-001
086406-002
086407-502
1238HH24B-WDBABB
12KM02E-V0002
1HSB495663-2
1SAJ924007R0001
1SAR700012R0005
1TGE120011R1001
1TGE120021R0010
1TGE120021R0110
20.5*15.5*8.7
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,