MicroInnovation-XVH-340-57CAN-1-10
Micro Innovation AG XVH-340-57CAN-1-10 HMI eaton
MICRO PANEL: XVH-330-57BAS or XVH-330-57CAN or XVH-330-57MPI or XVH-340-57BAS or XVH-340-57CAN or XVH-340-57MPI or XVH-342-57SKS or MH2-330-57BAS or MH2-330-57CAN or MH2-330-57MPI or MH2-340-57BAS or MH2-340-57CAN or MH2-340-57MPI
Requirements for the mounting position The device is designed for mounting in control cabinets, control panels or control desks. It can be mounted horizontally or vertically. The following requirements must be fulfilled when selecting a suitable mounting position:
The device should not be exposed to direct sunlight (Sunlight disturbs the infra-red touch sensor. In addition, when exposed to UV light, plastic parts of the device can embrittle and the lifespan of the device is reduced).
If the device is to be used in potentially explosive atmospheres, the device must not be subjected to hazardous knocks.
The operating elements on the service side of the device and the cable connections are accessible after the device has been mounted.
The ambient conditions stated must be observed. See Chapter 9.9 Ambient conditions,
63. Sufficient ventilation (cooling) must be ensured by means of:
Clearance of at least 3 cm to the ventilation slots
Clearance of at least 15 cm from heat radiating components such as heavily loaded trans formers
The expected temperatures should be within the permissible range. See Chapter 9.9 Ambient conditions,
63. Properties of the mounting surfaces:
Material thickness at the mounting cutout 2…5 mm
Flatness ≤ 0.5 mm (this requirement must also be fulfilled when the device is mounted!)
Surface roughness Rz ≤ 12
Panel 800 family comprises of user-friendly, intuitive and ergonomic operator panels
thath combine slim, space-saving dimensions with a comprehensive range of advanced
functions. Designed to make process automation easy, all panels are equipped with
advanced functionality for process and equipment control, maneuvered either by
function keys located next to the screen or by touching the LCD display.
Processor
1.0 GHz Intel® Atom™
1.6 GHz Intel® Atom™
Main memory
1 GB
Application memory
3,5 GB (SLC)
External storage media
1 × SD card slot (or SDHC with latest image loaded)
Realtime clock
Yes
Ethernet (shielded RJ 45)
1 × 10/100 Base-T, 1 × 10/100/1000 Base-T
USB
3 × USB Host 2.0, max 500mA
Serial port
1 × RS232, 1 × RS422/485 (isolated)
Delivery:
Warranty:
All our products are covered by our own warranty.
Payment method:
Quick Quote: Receive price and availability today!
Replacing an electrical equipment unit in a plant is a complex task that requires careful planning and execution to ensure safety and minimize downtime. Here is a general step-by-step guide on how to replace electrical equipment in a plant:
Pre-Planning:
Safety Precautions:
Shutdown Procedures:
Disconnection:
Removal of Existing Equipment:
Installation of New Equipment:
Testing and Commissioning:
Documentation:
Training:
Startup:
Throughout the process, it’s important to work closely with a team that includes electrical engineers, technicians, and maintenance staff. Communication is key to a successful equipment replacement. Additionally, always adhere to local electrical codes and standards to ensure compliance and safety. If the task is beyond the expertise of in-house staff, consider hiring a professional contractor experienced in industrial electrical work.
Obtaining industrial automation programming software typically involves the following steps:
Identify Your Needs:
Research Software Options:
Contact Equipment Manufacturers:
Purchase or Download:
Academic or Evaluation Versions:
Open Source Options:
Licensing:
Training and Support:
Legal and Compliance:
Installation and Setup:
Here are some common ways to obtain industrial automation programming software:
Remember to keep your software updated to benefit from the latest features and security patches. Also, ensure that you have the necessary backup and recovery procedures in place to protect your programming work.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,