DEIF Paralleling & Protection Unit PPU-2
DEIF Paralleling & Protection Unit PPU-2
Easy to operate and configure, DEIF’s PPU-2 control and protection unit is an ideal controller for PLC-based power management systems. Apart from generator protection and synchronisation, the PPU-3 also features regulation modes including load sharing, fixed power, fixed frequency, etc. Serial communication enables easy interfacing with PLCs, SCADA-systems and more, and the unit features all necessary three-phase measuring circuits, displaying all values and alarms on a quality LCD screen.
Turning the PPU-3 into an engine control unit featuring start/stop and protection functionalities, the optional engine interface card also has a separate power supply and an independent microprocessor.
In cases of PPU-3 processor breakdowns, the engine interface card will enter into backup mode and ensure uninterrupted engine supervision.
In cases of shutdown alarms, the engine shuts down automatically, making it a reliable solution for control and supervision of marine gensets.
Additional Operator Panels (AOP) can easily be installed and integrated for further levels of remote control, supervision and status indication. Both displays and panels feature a dimmer function for use on the ship’s bridge.
With a range of additional hardware options available, as well as DEIF’s Multi-Line 2 Utility Software v.3 (USW-3) with programmable logic (M-Logic), you can customise the application to suit your needs exactly: dedicate specific functions or logic conditions to different inputs and outputs and tune all sequences according to your requirements.
First, the importance of industrial equipment installation
In modern industrial production, various equipment and machines are widely used in various fields, such as manufacturing, energy industry, chemical industry and so on. The installation of industrial equipment is directly related to production efficiency and product quality. Proper installation and commissioning of good equipment can ensure the stable operation of the production line, improve production efficiency and product quality, reduce maintenance costs, and ensure the safety of employees.
Second, the steps of industrial equipment installation
1. Preparation: Before the installation of industrial equipment, it is necessary to carry out adequate preparation work. This includes the tools and equipment required for installation, cleaning and preparation of the installation site, and making installation plans and schedules.
2. Determine the installation position: Determine the installation position of the equipment according to the requirements of the equipment and the layout of the production line. When determining the location, the weight and size of the equipment need to be considered, as well as the coordination of the equipment with the surrounding environment.
3. Install the device: Assemble and install the device according to the installation instructions. Ensure that the device is securely and accurately connected, while protecting the appearance and internal components of the device.
4. Connect power supplies and pipelines: For devices that require power supplies and power supplies, properly connect power supplies and pipelines. The connection of power supply and pipeline should comply with safety standards to avoid hazards such as electric shock and leakage.
5. Commissioning the device: After the installation is complete, you need to commission the device to ensure that the device can run properly. It includes checking the functions and performance of the equipment, adjusting the parameters and Settings of the equipment, and carrying out the necessary tests and inspections.
6. Training operators: After the installation of the equipment, it is necessary to train the operators to understand the operation methods and precautions of the equipment, and improve the operation skills and safety awareness of the employees.
Third, industrial equipment installation precautions
1. Safety first: When installing industrial equipment, safety is the most important consideration. You must operate in strict accordance with safety regulations and wear necessary protective equipment to ensure the safety of the workplace.
2. Strictly follow the equipment instructions: Industrial equipment usually comes with detailed installation instructions, you must carefully read and understand the contents of the instructions, and install the operation in accordance with the requirements of the instructions.
3. Pay attention to the assembly sequence: When installing the device, follow the correct assembly sequence to ensure that all components of the device are assembled correctly to avoid equipment failures or safety accidents caused by incorrect assembly sequence.
GE Panametrics MIS Probe 95C2001 w/o Moisture Probe |
GE Panametrics M2LR M-Series Probe Moisture Sensor 1502G |
GE Panametrics M2LR M-Series Probe Moisture Sensor 225606 PR |
GE Panametrics M2LR M-Series Probe Moisture Sensor 214078 PR |
GE Panametrics M2LR M-Series Probe Moisture Sensor 178189 PR |
GE DigitalFlow GF868 Panametrics Flare Gas Mass Flowmeter GF868-1-26-20A 14-S |
General Electric AT868W-1-1-1-1 Aqua Trans Flowmeter |
Olympus ILP-1 High Intensity External Light Source - IPLEX GE Panametrics NDT |
GE Panametrics M2LR M-Series Probe Moisture Sensor 129535 PR |
Olympus Panametrics EHC-09 Thickness Gauge Ultrasonic Flaw Tester NDT GE Gage |
GENERAL ELECTRIC 26 / 26 () |
GE Panametrics MMS35-321-1-00 0 MMS353211000 Moisture Monitor |
Ge Panametrics Ultrasonic Flowmeter UTX878-1-11-00 00-1 |
Eddy Current Standard Flaw Detector NDT Olympus Panametrics GE Krautkramer |
GE Panametrics M2LR M-Series Probe Moisture Sensor 147415 PR Special |
Gould Bass DLM-1500 Digital Radiometer Lightmeter NDT Olympus GE Panametrics |
GE Panametrics MTS-351-10 Moisture Target Series 5 Hygrometer w/ Paired Probe |
GE Panametrics AT 868 Aqua Trans Flow Meter AT868-1-1-1 85-265V AC |
GE Panametrics Moisture Monitor Series 3 Model MMS3-221-40-04 00, 2 Channel, 120V |
GE DigitalFlow XMT868i-1-11-0 0-07114-0 Panametrics Ultrasonic Liquid Flow Meter |
GE Panametrics O2X1 IS Process Oxigen Sensor Transmitter 4-20mA |
GE PANAMETRICS 703-1475-01 FOUNDATION FIELDBUS OPTION MASTER LIQUID X515-8295E |
GE PANAMETRICS AQUA TRANS FLOWMETER #AT868W-1-1-1- 1, for Parts /Repair |
Gas Flow Meter Panametrics GE Digital Flow GC868 |
PANAMETRICS GENERAL ELECTRIC P1347 POSITION MATCH GENERATOR NEW SEALED |
Gould Bass DLM-1500 Digital Radiometer Lightmeter NDT Olympus GE Panametrics |
Krautkramer Branson USN 52 Ultrasonic Flaw Detector |
Olympus Nortec 3000 Eddy Current Flaw Detector - NDT Panametrics Krautkramer GE |
GE O2X1 OXYGEN TRANSMITTER (149-5) |
GE Druck 703-1476-05 MODBUS/TCP option board wall mount |
GE PANAMETRICS BAS01ATEX1096X M2 MOISTURE PROBE (R5S1.7B2) |
Delivery:
Warranty:
All our products are covered by our own warranty.
Payment method:
Quick Quote: Receive price and availability today!
Replacing an electrical equipment unit in a plant is a complex task that requires careful planning and execution to ensure safety and minimize downtime. Here is a general step-by-step guide on how to replace electrical equipment in a plant:
Pre-Planning:
Safety Precautions:
Shutdown Procedures:
Disconnection:
Removal of Existing Equipment:
Installation of New Equipment:
Testing and Commissioning:
Documentation:
Training:
Startup:
Throughout the process, it’s important to work closely with a team that includes electrical engineers, technicians, and maintenance staff. Communication is key to a successful equipment replacement. Additionally, always adhere to local electrical codes and standards to ensure compliance and safety. If the task is beyond the expertise of in-house staff, consider hiring a professional contractor experienced in industrial electrical work.
Obtaining industrial automation programming software typically involves the following steps:
Identify Your Needs:
Research Software Options:
Contact Equipment Manufacturers:
Purchase or Download:
Academic or Evaluation Versions:
Open Source Options:
Licensing:
Training and Support:
Legal and Compliance:
Installation and Setup:
Here are some common ways to obtain industrial automation programming software:
Remember to keep your software updated to benefit from the latest features and security patches. Also, ensure that you have the necessary backup and recovery procedures in place to protect your programming work.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2025 Copyrighted
Phone(WeChat/Whatsapp)
+086-181 4410 0983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,