IC697BEM731 Series 90-70 Genius I/O Bus Controller
IC697BEM731 Series 90-70 Genius I/O Bus Controller
With our CPX family of CPUs, the Series 90-70
offers more for your automation dollar—more
computing power, more memory for your
applications, and more communications and
redundancy capabilities. And it provides
increased flexibility for a variety of
applications due to a wide range of isolated
and high-density VME analog I/O modules.
Open Architecture
Based on the VME-bus standard, the Series
90-70 can be used with thousands of boards
produced by hundreds of different manufacturers
to build a solution that meets your
exact needs. These include links to drives
and drive systems, servo motor controllers,
embedded solutions for vision systems and
bus-to-bus interface modules, as well as a
variety of modules available from GE (see
accompanying table).
Various Degrees of Redundancy
Combining the Series 90-70 with the
advanced functionality of Genius* I/O,
GE Genius Modular Redundancy (GMR)
systems and Hot Standby systems can
provide as much or as little redundancy
as you need for your critical applications.
• The versatility and strength of the GMR
system make it an ideal choice for rigorous
emergency shutdown and human life protection
systems. It has a class 6 TÜV rating.
• Based on three isolated PLCs and extensive
diagnostics, the GMR triple modular
redundancy system uses two-out-of-three
voting to provide high reliability and errorfree
operation.
• CPU Genius Redundancy (CGR) systems
achieve enhanced hot standby CPU redundancy
by connecting two power supplies
and two CGR CPUs to one or more Genius
I/O networks.
Flexible Communications Options
The Series 90-70 offers a wide variety of
communications options, including Ethernet
TCP/IP, reflective memory, Genius LAN,
and serial communications modules that
enable precise solutions using off-the-shelf
components. It is an ideal candidate for
acting as your factory-floor server, collecting
data and seamlessly integrating it with the
ERP system.
------------------------------------------------------------------------------------------------
Simplex Controllers
IC697CPU731 CPU, 512 Discrete I/O, 32K Memory, 12 MHz Processor, 1 serial port
IC697CPX928 CPU, 12K Discrete I/O, 6 Meg Memory, 96 MHz Processor, 3 serial ports
IC697CPX772 CPU, 2K Discrete I/O, 512K Memory, 96 MHz Processor, 3 serial ports
IC697CPX935 CPU, 12K Discrete I/O, 1 Meg fast access Memory, 96 MHz Processor,
3 serial ports
IC697CPX782 CPU, 12K Discrete I/O, 1 Meg Memory, 96 MHz Processor, 3 serial ports
Hot Standby CPUs IC697CGR772 CPU, 2K Discrete I/O, 512K Memory, 96 MHz Processor, 3 serial ports
IC697CGR935 CPU, 12K Discrete I/O, 1Meg Memory, 96 MHz Processor, 3 serial ports
Critical Control CPU IC697CPM790 CPU, 2K Discrete I/O, 1 Meg Memory, 64 MHz Processor. Triplex Voted I/O
IC697ACC700 Terminal Block, 40 Contacts (qty 6)
IC697ACC701 Replacement Battery, CPU & PCM (qty 2)
IC697ACC702 I/O Bus Terminator Plug
IC697ACC715 Kit, VME Integrator, J2 Backplane Mounting
IC697ACC720 Blank Slot Filler, full slot rack (qty. 6)
IC697ACC721 Rack Cooling Fan, 115 Volt
IC697ACC722 VME Backplane Connector, Interrupt Jumper (qty 6)
IC697ACC723 Clear Plastic Doors (qty 6)
IC697ACC724 Rack Cooling Fan, 230 Volt
IC697ACC726 Top PWA Cover, CPU-Style, (Quantity 6)
IC697ACC727 Top and Bottom PWA Cover - GBC (Quantity 2)
IC697ACC728 Top and Bottom PWA Cover - BTM/BTR (Quantity 2)
IC697ACC729 Top and Bottom PWA Cover - I/O Link
IC697ACC730 Spare Slot Terminal Strip Retainer (Quantity 1)
IC697ACC732 Top PWA Cover - CPU77x and CPU78x (Qty 2)
IC697ACC735 Blank Slot Filler, half slot integrators rack (qty. 6)
IC697ACC744 Rack Cooling Fan, 24 VDC
IC697ACC775 Gold plated analog terminal blocks for IC697ALG234, IC697ALG324, IC697ALG444 and IC697ALG445. Qty 6 blocks in package.
IC697ACC800 Fiber Optic Cable for Reflective Memory module (IC697VRM015). Five fe et long.
IC697ACC801 I/O Cable (96 conductor) for IC697Vxxxxx modules. Five feet long
IC697ACC802 I/O Cable (64 conductor) for IC697Vxxxxx modules. Five feet long
IC697ACC803 I/O Cable (32 conductor) for IC697Vxxxxx modules. Five feet long
IC697ACC804 I/O Cable (96 conductor) for IC697Vxxxxx modules. Ten feet long
IC697ACC805 I/O Cable (64 conductor) for IC697Vxxxxx modules. Ten feet long
IC697ACC820 DIN Rail Transition Module 32 Pin for IC697Vxxxxx modules
IC697ACC821 DIN Rail Transition Module 64 Pin for IC697Vxxxxx modules
IC697ACC822 DIN Rail Transition Module 96 Pin for IC697Vxxxxx modules
IC697ADC701 CIMPLICITY 90-ADS Coprocessor (Repeat Systems)
IC697ADC701RR Access 90 Display Coprocessor
IC697ADS701 CIMPLICITY 90-ADS Package (First System)
IC697ALG230 Analog Input, Voltage/Current, 8 Channels
IC697ALG230RR Analog Input, Voltage/Current, 8 Channels
IC697ALG234 Analog Input, Voltage/Current, 8 Channels gold plated terminal. WARNING: The IC697ALG234 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module.
IC697ALG320 Analog Output, Voltage/Current, 4 Channels
IC697ALG320RR Analog Output, Voltage/Current, 4 Channels
IC697ALG324 Analog Output, Voltage/Current, 4 Channel sgold plated terminal. WARNING: The IC697ALG324 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module.
IC697ALG440 Analog Input Expander, Current, 16 Channels
IC697ALG440RR Analog Input Expander, Current, 16 Channels
IC697ALG441 Analog Input Expander, Voltage, 16 Channels
IC697ALG441RR Analog Input Expander, Voltage, 16 Channels
IC697ALG444 Analog Input Expander, Current, 16 Channels gold plated terminal. WARNING: The IC697ALG444 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module.
IC697ALG445 Analog Input Expander, Voltage, 16 Channels gold plated terminal. WARNING: The IC697ALG445 module must be matched with IC697ACC775 terminal block ONLY. IC697ACC775 is included with the module.
IC697BEM711 Bus Receiver (Required for Each Local Expansion Rack)
IC697BEM711RR Bus Receiver (Required for Each Local Expansion Rack)
IC697BEM713 Bus Transmitter (Also Provides Parallel Programming Port)
IC697BEM713RR Bus Transmitter (Also Provides Parallel Programming Port)
IC697BEM715RR VME Bus Transmitter
IC697BEM721 I/O Link Interface Module for the Series 90-70
IC697BEM721RR I/O Link Interface Module
IC697BEM731 Series 90-70 Genius I/O Bus Controller
IC697BEM731RR Series 90-70 Genius I/O Bus Controller
IC697BEM733 Series 90-70 Genius Remote I/O Scanner
IC697BEM733RR Series 90-70 Genius Remote I/O Scanner
IC697BEM741 Sell to Alstom only. FIP Bus Controllerfor 9070
IC697BEM741RR FIP Bus Controller 9070
IC697BEM761 Series 90-70 I/O Interface (Used with Series Six Plus PLC)
IC697BEM761RR Series 90-70 I/O Interface (Used with Series Six Plus PLC)
IC697BEM763RR DLan Interface
IC697BEM764RR DLAN Interface for VME
IC697CBL700 Cable Kit, Power Supply Exp. (Used for 2-Rack P/S Function)
IC697CBL709 Cable, MAP Controller to Broadband Modem
IC697CBL803 Cable, RCM Communication (3 feet)
IC697CBL811 Cable, RCM Communications (10 feet)
IC697CBL826 Cable, RCM Communications (25 feet)
IC697CGR772 Hot Standby Genius Dual Bus CPU, 486DX4, 2K Discrete I/O, 512K byte fi xed user memory, Floating Pt.
IC697CGR935 Hot Standby Genius Dual Bus CPU, 486DX4, 12K Discrete I/O, 1M fixed us er memory, Floating Pt.
IC697CGR935RR Hot Standby Genius Dual Bus CPU, 486DX4, 12K Discrete I/O, I M fixed u ser memory, Floating pt.
IC697CHS750 Rack, 5 Slots, Rear Mount
IC697CHS750RR Series 90-70, 5 Slot Rack, Rear Mount
IC697CHS770 Redundant Rack (Dual) Rear Mount
IC697CHS771 Redundant Rack (Dual) Front Mount
IC697CHS782 Integrators Rack, 17 Slots, Rear Mount
IC697CHS782RR Series 90-70, 17 Slot Rack, Front Mount
IC697CHS783 Integrators Rack, 17 Slots, Front Mount
IC697CHS783RR Series 90-70, 17 Slot Rack, Rear Mount
IC697CHS790 Rack, 9 Slots, Rear Mount
IC697CHS790RR Series 90-70, 9 Slot Rack, Rear Mount
IC697CHS791 Rack, 9 Slots, Front Mount
IC697CHS791RR Series 90-70, 9 Slot Rack, Front Mount
Delivery:
Warranty:
All our products are covered by our own warranty.
Payment method:
Quick Quote: Receive price and availability today!
Replacing an electrical equipment unit in a plant is a complex task that requires careful planning and execution to ensure safety and minimize downtime. Here is a general step-by-step guide on how to replace electrical equipment in a plant:
Pre-Planning:
Safety Precautions:
Shutdown Procedures:
Disconnection:
Removal of Existing Equipment:
Installation of New Equipment:
Testing and Commissioning:
Documentation:
Training:
Startup:
Throughout the process, it’s important to work closely with a team that includes electrical engineers, technicians, and maintenance staff. Communication is key to a successful equipment replacement. Additionally, always adhere to local electrical codes and standards to ensure compliance and safety. If the task is beyond the expertise of in-house staff, consider hiring a professional contractor experienced in industrial electrical work.
Obtaining industrial automation programming software typically involves the following steps:
Identify Your Needs:
Research Software Options:
Contact Equipment Manufacturers:
Purchase or Download:
Academic or Evaluation Versions:
Open Source Options:
Licensing:
Training and Support:
Legal and Compliance:
Installation and Setup:
Here are some common ways to obtain industrial automation programming software:
Remember to keep your software updated to benefit from the latest features and security patches. Also, ensure that you have the necessary backup and recovery procedures in place to protect your programming work.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,