IC694ALG232 RX3i Efficiency 16-Channel Advanced Analog Voltage Input module
IC694ALG222 Input module, analog 16 point single ended/8 channel differential, voltage.
There are three models of embedded baseplates, the 311, 313, and 323. These model
numbers are based upon the CPU type that each contains. This chapter discusses only
the baseplate features of these products. CPU specifications for the embedded CPU are
located in Chapter 4. The embedded CPU baseplates have the following features:
The CPU type cannot be changed.
They do not support the use of expansion or remote racks, so these racks do
not have an expansion connector like the modular CPU baseplates do.
The models 311 and 313 are 5-slot baseplates, and the model 323 is a 10-slot
baseplate.
Since they do not require a plug-in CPU module, all numbered slots,
including Slot 1, can be used for I/O or Option modules.
The memory back-up battery is located in the Power Supply module; so if
the Power Supply is unplugged from the baseplate, the battery will be
disconnected from the memory circuits, which are located on the backplane
circuit board. However, the backplane circuit board contains a high value
capacitor, sometimes called a ”super capacitor,” that can store enough charge
to maintain the memory circuits for about 1 hour if the Power Supply is
removed or its battery is disconnected. Chapter 6 discusses the
IC693ACC315 Battery Accessory kit that can be used to maintain memory
contents when the Power Supply is removed from an embedded CPU
baseplate.
There are no configuration switches or jumpers on the Model 311, 313, or
323 baseplates.
An embedded CPU baseplate is always assigned, by default, Rack Number
Zero (0).
A Power Supply module must be plugged into the left slot (which is not
numbered) of these baseplates. The left slot is a unique size and type that
only supports a Power Supply module.
A CPU module (or a special Option module) must be installed in Slot 1 of
these baseplates. Slot 1 is a unique size and type that only supports a CPU
module or a special Option module like the FIP Remote I/O Scanner
(IC693BEM330). Slot 1 is labeled CPU/1.
Slots numbered 2 and above are of a unique size and type that only
supports I/O or Option modules.
Expansion and Remote baseplates are supported, so a 25-pin D-type female
expansion connector is located at the right end of the baseplate for
connecting to an Expansion or Remote baseplate.
Since the CPU is modular, it can be replaced or changed to a different type if
additional features are desired.
Only one CPU baseplate is allowed per system. If more than one baseplate
is used in a system, the additional ones must be either Expansion or Remote
types.
A modular CPU baseplate is always assigned, by default, Rack Number 0.
The Series 90-30 I/O modules described in this manual can be controlled two ways:
1. With a Series 90-30 Programmable Logic Controller (PLC).
2. With a Personal Computer (PC) that has an installed Personal Computer Interface card (or
similar interface). This allows software on the PC to control and monitor Series 90-30 I/O.
If you are using Series 90-30 I/O as part of a Series 90-30 PLC system, you should refer to
GFK-0356, the Series 90-30 Programmable Controller Installation manual, for more information.
If you are using a Personal Computer to control the Series 90-30 I/O, refer to the documentation
for the PCIF, your Personal Computer, and your application software for more information.
In addition to Series 90-30 I/O modules, the I/O system supports a wide variety of option
modules, such as
Genius Communications and Bus Controller
Communications Control module (for serial communications)
Programmable Coprocessor Modules and Alphanumeric Display Coprocessor
Motion control and High Speed Counter modules
Ethernet interface,
Various bus controllers.
State Logic modules
-----------------------------
IC693PTM100CA Conformal Coated Power Transducer Module
IC693PTM101 Power Transducer Module (Includes module, interface, 1m cable)
IC693PTM101CA Conformal Coated Power Transducer Module
IC693PWR321 Power Supply, 120/240 Vac, 125 Vdc, Standard, Battery not included. B attery is now included in the CPU backplane box.
IC693PWR321CA Conformal Coated Power Supply 120/240VAC, standard.
IC693PWR321LT Power Supply, 120/240 Vac, 125 Vdc, Standard (LT)
IC693PWR321RR Power Supply, 120/240 Vac, 125 Vdc, 30 Watts
IC693PWR322 Power Supply, 24/48 Vdc, Standard. Battery not included. Battery is n ow included in the CPU backplane box.
IC693PWR322LT Power Supply, 24/48 Vdc, Standard (LT)
IC693PWR322RR Power Supply, 24/48 Vdc, 30 Watts
IC693PWR328 Power Supply, 48 Vdc, Standard. Battery not included. Battery is now included in the CPU backplane box.
IC693PWR328LT Power Supply, 48 Vdc, Standard (LT)
IC693PWR330 Power Supply, 120/240 Vac, 125 Vdc, High Capacity. Battery not include d. Battery is now included in the CPU backplane box.
IC693PWR330CA Conformal Coated Power Supply 120/240VAC 125VDC, added capacity.
IC693PWR330RR Power Supply, 120/240 Vac, 125 Vdc, High Capacity
IC693PWR331 Power Supply, 24 Vdc, High Capacity. Battery not included. Battery is now included in the CPU backplane box.
IC693PWR331CA Conformal Coated Power Supply 24VDC, added capacity
IC693PWR331RR Power Supply, 24 Vdc, High Capacity
IC693PWR332 Series 90-30 12VDC Power Supply. 30 watt
IC693TCM302 Temperature Control Module
IC693TCM303 Temperature Control Module Extended Range
IC693UAA003RR 14 pt AC In/AC Out, AC Power Supply
IC693UAA007RR 28 pt AC In/AC Out, AC Power Supply
IC693UAL006RR 23pt DC In/Relay Out/DC Out/2 AI/1 AQ, AC Pwr. Sup.
IC693UDR001RR 14 pt DC In/Relay Out, CC Power Supply
IC693UDR002RR 14 pt DC In/Relay Out, DC Power Supply
IC693UDR005RR 28 pt DC In/Relay Out/DC Out, AC Power Supply
IC693UDR010RR 28pt DC In/Relay Out/DC Out, DC Pwr. Sup.
IC693UEX011RR 14pt DC In/Relay Out, AC Pwr. Sup.
IC694ACC003 Door labels for the IC694MDLxxx I/O modules. The kit includes two each of the following modules. IC694ACC300, IC694ACC310, IC694ALG220, IC694ALG221, IC694ALG222, IC694ALG223, IC694ALG390, IC694ALG391, IC694ALG392, IC694ALG442,IC694APU300, IC694APU3
IC694ACC300 Input simulator module, 16 points.
IC694ACC310 RX3i Blank filler module
IC694ACC311 Terminal blocks, 20 terminal (qty 6) for IC694xx I/O modules only.
IC694ALG220 Input module, analog 4 point voltage.
IC694ALG220CA Conformal Coated Analog Input Voltage module, 4 channels.
IC694ALG220LT INPUT ANALOG 4PT VOLTAGE (LT)
IC694ALG221 Input module, analog 4 point current.
IC694ALG221CA Conformal Coated Input module, analog 4 point current.
IC694ALG221LT Low Temperature Tested Input module, analog 4 point current.
IC694ALG222 Input module, analog 16 point single ended/8 channel differential, voltage.
IC694ALG222CA Conformal Coated Analog Voltage Input module 16 channels single ended/ 8channels differential
IC694ALG222LT Low Temperature Tested Input module, analog 16 point single ended/8 channel differential, voltage.
IC694ALG223 Input module, analog 16 point single ended, current.
IC694ALG223CA Input module, analog 16 point single ended, current.
IC694ALG223LT Low Temperature tested (-40C to 60C) Input module, analog 16 point single ended, current.
IC694ALG232 RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy? Machine Edition Log
IC694ALG232CA Conformal Coated RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy? Ma
IC694ALG232LT Low Temperature. RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy? M
IC694ALG233 RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics. Requires Proficy? Machine Edition Logic Developer 6.5 SIM
IC694ALG233CA Conformal Coated RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics. Requires Proficy? Machine Edition Logic De
IC694ALG233LT Low Temperature. RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics. Requires Proficy? Machine Edition Logic D
IC694ALG390 OUTPUT MODULE ANALOG 2 POINT VOLTAGE
IC694ALG390LT Low Temperature Tested OUTPUT MODULE ANALOG 2 POINT VOLTAGE
Delivery:
Warranty:
All our products are covered by our own warranty.
Payment method:
Quick Quote: Receive price and availability today!
Replacing an electrical equipment unit in a plant is a complex task that requires careful planning and execution to ensure safety and minimize downtime. Here is a general step-by-step guide on how to replace electrical equipment in a plant:
Pre-Planning:
Safety Precautions:
Shutdown Procedures:
Disconnection:
Removal of Existing Equipment:
Installation of New Equipment:
Testing and Commissioning:
Documentation:
Training:
Startup:
Throughout the process, it’s important to work closely with a team that includes electrical engineers, technicians, and maintenance staff. Communication is key to a successful equipment replacement. Additionally, always adhere to local electrical codes and standards to ensure compliance and safety. If the task is beyond the expertise of in-house staff, consider hiring a professional contractor experienced in industrial electrical work.
Obtaining industrial automation programming software typically involves the following steps:
Identify Your Needs:
Research Software Options:
Contact Equipment Manufacturers:
Purchase or Download:
Academic or Evaluation Versions:
Open Source Options:
Licensing:
Training and Support:
Legal and Compliance:
Installation and Setup:
Here are some common ways to obtain industrial automation programming software:
Remember to keep your software updated to benefit from the latest features and security patches. Also, ensure that you have the necessary backup and recovery procedures in place to protect your programming work.
Region Email:
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,