IC693PCM300 Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl.

There are three models of embedded baseplates, the 311, 313, and 323. These model

numbers are based upon the CPU type that each contains. This chapter discusses only

the baseplate features of these products. CPU specifications for the embedded CPU are

located in Chapter 4. The embedded CPU baseplates have the following features:

The CPU type cannot be changed.

They do not support the use of expansion or remote racks, so these racks do

not have an expansion connector like the modular CPU baseplates do.

The models 311 and 313 are 5-slot baseplates, and the model 323 is a 10-slot

baseplate.

Since they do not require a plug-in CPU module, all numbered slots,

including Slot 1, can be used for I/O or Option modules.

The memory back-up battery is located in the Power Supply module; so if

the Power Supply is unplugged from the baseplate, the battery will be

disconnected from the memory circuits, which are located on the backplane

circuit board. However, the backplane circuit board contains a high value

capacitor, sometimes called a ”super capacitor,” that can store enough charge

to maintain the memory circuits for about 1 hour if the Power Supply is

removed or its battery is disconnected. Chapter 6 discusses the

IC693ACC315 Battery Accessory kit that can be used to maintain memory

contents when the Power Supply is removed from an embedded CPU

baseplate.

There are no configuration switches or jumpers on the Model 311, 313, or

323 baseplates.

An embedded CPU baseplate is always assigned, by default, Rack Number

Zero (0).

A Power Supply module must be plugged into the left slot (which is not

numbered) of these baseplates. The left slot is a unique size and type that

only supports a Power Supply module.

A CPU module (or a special Option module) must be installed in Slot 1 of

these baseplates. Slot 1 is a unique size and type that only supports a CPU

module or a special Option module like the FIP Remote I/O Scanner

(IC693BEM330). Slot 1 is labeled CPU/1.

Slots numbered 2 and above are of a unique size and type that only

supports I/O or Option modules.

Expansion and Remote baseplates are supported, so a 25-pin D-type female

expansion connector is located at the right end of the baseplate for

connecting to an Expansion or Remote baseplate.

Since the CPU is modular, it can be replaced or changed to a different type if

additional features are desired.

Only one CPU baseplate is allowed per system. If more than one baseplate

is used in a system, the additional ones must be either Expansion or Remote

types.

A modular CPU baseplate is always assigned, by default, Rack Number 0.

The Series 90-30 I/O modules described in this manual can be controlled two ways:

1. With a Series 90-30 Programmable Logic Controller (PLC).

2. With a Personal Computer (PC) that has an installed Personal Computer Interface card (or

similar interface). This allows software on the PC to control and monitor Series 90-30 I/O.

If you are using Series 90-30 I/O as part of a Series 90-30 PLC system, you should refer to

GFK-0356, the Series 90-30 Programmable Controller Installation manual, for more information.

If you are using a Personal Computer to control the Series 90-30 I/O, refer to the documentation

for the PCIF, your Personal Computer, and your application software for more information.

In addition to Series 90-30 I/O modules, the I/O system supports a wide variety of option

modules, such as

Genius Communications and Bus Controller

Communications Control module (for serial communications)

Programmable Coprocessor Modules and Alphanumeric Display Coprocessor

Motion control and High Speed Counter modules

Ethernet interface,

Various bus controllers.

State Logic modules

-----------------------------

IC693ACC330 Base is discontiued.  Use generic TBQC base IC693ACC329.

IC693ACC331 Base is discontiued.  Use generic TBQC base IC693ACC329.

IC693ACC332 TBQC Base for IC693MDL940

IC693ACC333 TBQC Base for IC693MDL340

IC693ACC334 Faceplate provides a 24 pin fale Fujitsu connector for cable connection. Faceplate replaces I/O module terminal block (20 screw terminal connector).

IC693ACC335 Axis terminal block for the DSM302 or DSM314

IC693ACC336 Auxiliary terminal block for the DSM302 or DSM314 or DSM324 5V I/O

IC693ACC337 TBQC Base for IC693MDL654/655/752/753

IC693ACC338 CPU364 FACEPLATE KIT CONTAINS 5 EACH FRONT PLASTIC AND LABELS

IC693ACC341 Redundant Power Supply Base with 0.5 meter cable to connect to Power S upply Adapter  module.  Supports any Series 90-30 power supply.

IC693ACC350 Redundant Power Supply Adapter (RPSA) Module.  The RPSA replaces the p ower supply on a CPU base or expansion base and connects to a Redundan t Power Supply Base.

IC693ACC400 Expanded battery backup for Series 90-30 CPUs. Quantity 1.  8.5 Amp hour battery for Series 90-30 CPU311, 313, 323 and CPU36x type only.  Not compatible with Series 90-30 CPU37x CPUs.  The battery mounts on power supply and extends the depth of the s

IC693ACC760 Solenoind Valve Module Forcing Pendent

IC693CBL313 I/O rack expansion cable,  8 Meters

IC693CBL316 Station Manager Serial Cable for Ethernet TCP/IP

IC693CBL319 I/O cable for DSM324 24V I/O or APM I/O to the 44A726268-001 terminal block. 1 meter

IC693CBL324 I/O cable for DSM302 or DSM314 or DSM324 5V I/O. 1 meter

IC693CBL325 I/O cable for DSM302 or DSM314 or DSM324 5V I/O. 3 meters

IC693CBL327 Cable, Left Side, One - 24 Pin 90 Degree Connector, 3 Meter.

IC693CBL328 Cable, Right Side, One - 24 Pin 90 Degree Connector, 3 Meter

IC693CBL329 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 1 Meter

IC693CBL330 Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 1 Meter

IC693CBL331 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 2 Meter

IC693CBL332 Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 2 Meter

IC693CBL333 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, .5 Meter

IC693CBL334 Cable, Right Side,18144100983 Two - 24 Pin 90 Degree Connectors, .5 Meter

IC693CMM321CA Conformal Coated Ethernet Interface module.  10Mbits, supports SRTP and Modbus TCP Client/Server.  The CMM321 no longer supports the AAUI/AUI interface.  If the AAUI/AUI is required, please contact GE Global Customer Care.

IC693CMM321RR Ethernet Interface Module

IC693CPU311 5-Slot Base With CPU in base (6K Bytes User Program)  Battery included

IC693CPU311CA Conformal Coated CPU311 5 slot base.  CPU built into base.

IC693CPU311LT 5-Slot Base With CPU in base (6K Bytes User Program)  (LT)

IC693CPU311RR Base 5 - slot with CPU311

IC693CPU313 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes  User Program) Battery included

IC693CPU313CA Conformal Coated CPU313 5 slot base.  CPU built into base.

IC693CPU313LT 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes  User Program)  (LT)

IC693CPU313RR 5-Slot Base With Turbo CPU (6 msec), 1K Registers

IC693CPU321RR 10-Slot Base With CPU (3K Words) & Manual

IC693CPU323 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program,  Battery included

IC693CPU323CA Conformal Coated CPU323 10 slot base.  CPU built into base.

IC693CPU323LT 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program (LT)

IC693CPU323RR 10-Slot Base With Turbo CPU (6 msec)

IC693CPU331 CPU 331 Module (16K Bytes), The battery for the CPU is now included in  the CPU backplane box.

IC693CPU331LT CPU 331 Module (16K Bytes)   (LT)

IC693CPU331RR CPU 331 Module, 8K Words, Manual

IC693CPU340RR CPU 340 Module, (16K Bytes user memory), 10K Reg., 3 msec/K

IC693CPU341RR CPU 341 Module, (80K Bytes user memory), 10K Reg., 3 msec/K

IC693CPU350 CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in S erial Ports .22msec/K,  The battery for the CPU is now included in the  CPU backplane box.

IC693CPU350CA Conformal Coated CPU350, 32Kbytes of memory

IC693CPU350LT CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in S erial Ports .22msec/K   (LT)

IC693CPU350RR CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in S erial Ports .22msec/K

IC693CPU351RR CPU 351 Module (4K I/O, 8 Racks)

IC693CPU352RR CPU 352 Module (4K I/O, 8 Racks, Floating Point Math)

IC693CPU360 CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks),  no built-in Serial Ports .22msec/K,  The battery for the CPU is now i ncluded in the CPU backplane box.

IC693CPU360CA Series 90-30 CPU360 with Conformal Coated.

IC693CPU360LT CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks),  no built-in Serial Ports .22msec/K   (LT)

IC693CPU360RR CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 racks),  no built-in Serial Ports