Automation System ABB Procontic T200

Automation System ABB Procontic T200

The ABB Procontic T200 automation system isa modular control system that largely satisfiesthe requirements of today and tomorrow.

Thanks to its rack based architecture and widerange of modules, the ABB Procontic T200 canbe assembled to suit most any application.

The simple handling and planning of thesystem saves time and money.

ABB Procontic T200 programming software isIBM-compatible and provides efficient processdisplay, PLe operation, and connection to fieldbuses.

ABB Procontic systems are designed for heavy-duty industrial operation and are distinguishedby their resistance to interference (EMC).Extensive diagnostic functions of the ABBProcontic T200 simplify commissioning andtroubleshooting of the system.

An ABB Procontic T200 control consists, in itssimplest form, of a module rack, a central unit,program memory, an input module, an outputmodule, and a power supply unit.

Expansion module racks provide ample roomfor further input and output devices. Fourcentral units classified according to their ex-pandability and a series of pre-processors andinterface equipment enable optimum adaptationof the ABB Procontic T200 to the respectivecontrol task. The T200 can be configured cen-trally (in the immediate vicinity) or decentrally.

Equipment overview

4 central units per rack, T200 offers a choiceof 4 central units graduated in perormancewith the same instruction set

RAM and EPROM memories with differentmemory capacities

3 basic module racks in 2, 5 and 8 slotconfigurations

3 expansion module racks with 4, 7 or 10 /Oslots

Descrete input and output devices availablein common voltages

Analog input and output devices for voltageand current

Input devices for temperatures

Interrupt input device, fast counter,positioning device

Modules for central and decentral coupling ofexpansion module racks

Interface equipment

Couplers for the ABB Procontic field busZB10, ABB Procontic T200 bus ZB20, andPROFIBUS

High-performance industrial computer

The ABB Procontic T200 with a number ofsubracks and its central unit can be suited toany application within wide limits.

Smallest System

Basic rack with central unit 07 ZE 60 and 25 or 8 peripheral slots

Medium System

Basic rack with central unit 07 ZE 61 and 25 or 8 peripheral slots

Expansion rack with 4, 7 or 10 peripheralslots

This makes a maximum of 18 peripheral slots

Maximum System

Basic rack with central unit 07 ZE 62or 07 ZE 63 and 2, 5 or 8 peripheral slots

up to 5 racks for central l/O expansion with4,7 or 10 peripheral slots each

This makes a maximum of 58 peripheralslots

Remote l/0-expansion systems overcome thespace restraints of a switchgear cabinet, and ofthe data capacity of a central assembly.

Up to 4 coupling units may be located withinthe basic rack, independent of the type ofcentral units and the centrally connectedexpansion racks.

The coupling units connect 4 lines, thus increa.sing the data scope of the ABB ProconticT200.

Decentral expansion with ABB Procontic T200components allows up to 10 substations(expansion module rack with l/O units per line)The total line lenght may be up to 1,640 ft(500 m) when using triax cables. lf the spuriousradiation on the connecting lines is above theusual level in industrial applications, fibre opticcables with a lenght of up to 32,800 ft (10 km)are used.

Decentral expansions via the ABB ProconticCS31 bus is also possible in the ABB ProconticT200. The special advantage of the ABB Pro-contic CS31 components is in the compactdesign of the modules which find room even inthe smallest of onsite terminal boxes. Eveny CS31line allows connection of up to 31 modules.The CS31 two-wire system bus may reach amaximum lenght of 1,640 ft (500 m).

Automatic control systems today require flexiblenetworks. ABB networks individual parts of aproduction plant with each cell having theirown intelligent processing units. There is achoice of two robust serial buses for networ-king: the ZB20 bus and the ZB10 field bus. TheZB20 bus supports the capabilities of the ABBProcontic T200 system whereas the ZB10 fieldbus con洩裶棋销nects other ABB Procontic systems.

The ZB20 bus connects up to 64 T200 stationsof the automatic control system. Each one ofthese stations can be fully expanded centrall!and decentrally. The distance between thestation撬s may be up to 1,640 ft (500 m) whenusing triax cables. Every station can include 2couplers providing connectivity with two diffe-rent bus systems for a total distance of 3,280 ft(1000 m). Fiber optic media is also available forindustrial applications that require high noiseimmunity. Maximum distance for fiber optic is32,800 ft (10 km)