GE Mark* VIe I/O Packs 输入输出模块 升级备件清单

This Extended Product Life Cycle Support Notice is intended to help you plan the maintenance and

evolution of your Mark VIe control system. This notice, as part of a broader Product Life Cycle

Support Policy, protects your investment with extensive replacement parts availability, typically

extending up to 10 years following the end of production date, including planned upgrade paths to

current control technologies.

At inception, Mark VIe controls embraced the principle of extended life cycle through an Ethernet

backbone design with discrete modular building blocks, including controllers, network components,

I/O modules, and extensive software tools. This flexible, modular, upgradeable architecture enables

our customers to maintain a state-of-the-art control system by upgrading or replacing components

as needed. This design allows for incremental technology upgrades, obsolescence protection, parts

life cycle planning and comprehensive system upgrades, without the need to replace the entire

control system.

The electronics technology for the Mark VIe I/O packs introduced in 2004 is obsolete, and updated

electronics technology was introduced in 2010. The updated Mark VIe I/O packs are

backward-compatible, and can be mixed and matched with the older technology including in TMR

systems.

Effective February 1, 2015, GEIP will offer only the updated technology I/O packs as indicated on the

following chart.

Obsolete Catalog   Number           Available Catalog   Number        Description

IS220PDIAH1A IS220PDIAH1B Contact In: 24 discrete inputs

IS220PDIIH1A IS220PDIIH1B Isolated Contact In: 16 discrete inputs

IS220PDIOH1A IS220PDIOH1B Discrete In/Out: 24 Contact In and 12 type C mechanical relays

IS220PDOAH1A IS220PDOAH1B Contact Out: 12 relays with status feedback

IS220PAICH1A IS220PAICH1B Analog In/Out: 10 analog input and 2 analog outputs

IS220PAICH2A IS220PAICH2B Analog In/Out with 200 mA Out

IS220PAOCH1A IS220PAOCH1B Analog Out: 8, 0-20 mA outputs

IS220PPDAH1A IS220PPDAH1B Power Distribution System Feedback

IS220PTCCH1A IS220PTCCH1B Thermocouples: 12 combustion optimized inputs, 1 cold junction

IS220PTCCH2A IS220PTCCH2B Thermocouples: 12 general industry inputs, 1 cold junction

IS220PRTDH1A IS220PRTDH1B RTD In: 8 RTDs

IS220PSCAH1A IS220PSCAH1B Serial Communications: 6 channels

IS220PCNOH1A IS220PCNOH1B CANopen® Communications

IS220PPRFH1A IS220PPRFH1B PROFIBUS® Communications

IS220PHRAH1A IS220PHRAH1B Hart® Analog In/Out: 10 AI (V/I inputs) and 2 AO (0-20 mA outputs)

with HART communications

IS220PCAAH1A IS220PCAAH1B Core Analog In/Out for heavy duty gas turbines

IS220PCLAH1A IS220PCLAH1B Core Analog In/Out for aero-derivative turbines

IS220PSVOH1A IS220PSVOH1B Servo Control: 2 outputs, 8 LVDT and 2 pulse rate inputs

IS220PTURH1A IS220PTURH1B Turbine In/Out: Primary Turbine protection

IS220PPRAS1A-HIA IS220PPRAS1B Turbine In/Out: Turbine Backup Protection

IS220PPROH1A IS220PPROS1B Turbine In/Out: Turbine Backup Protection

Not applicable IS215AEPCH2F AEPC - 30Nm non-CANBus Wind Pitch Control (Center/Axis)

IS215AEPCH1C IS215AEPCH1F AEPC - 30Nm Wind Pitch Control (Center/Axis)

IS215AEPCH1A IS215AEPCH1D AEPC -20Nm Non-ESS Wind Pitch Center Control

IS215AEPCH1B IS215AEPCH1E AEPC - 20Nm ESS Wind Pitch Center Control

IS215AEPAH1A IS215AEPAH1C AEPA - 20Nm Wind Pitch Axis Control

IS215WEPAH1A IS215WEPAH1B WEPA - 30Nm CANBus Wind Pitch Axis Control

IS215WEPAH2A IS215WEPAH2B WEPA - 30Nm non-CANBus Wind Pitch Axis Control

IS215WETAH1B IS215WETAH1CA WETA - Wind Topbox A Module

IS215WEMAH1A IS215WEMAH1BA WEMA -Wind Energy Main Cabinet “A” (DTA)

GE is committed to cost-effective, life-cycle support, and offers a wide range of hardware and

software product, services, and service agreements to keep your equipment running reliably. For

further assistance, contact the nearest GE Sales or Service Office, or an authorized GE Sales

Representative.