Molex SST-PB3-VME-1 and SST-PB3-VME-2 interface cards
The card is a VME interface for communication with Profibus networks. Each channel can:
• Act as a DP master
• Act as a DP slave
• Send and receive FDL (layer 2) messages
• Support Master Class 1 and Master Class 2 messaging
• Support simultaneous operation in all of the above modes
• Support the standard Profibus baud rates of 9.6K, 19.2K, 93.75K, 187.5K, 500K, 1.5M, 3M, 6M and 12M baud
• Support 16-bit transfers (VME D16) with both VME A24 (standard) and A16 (short I/O) address transfers
To install and operate the card, the following system requirements must be met:
• A controller that conforms to VMEbus spec VME64 (VITA 1.1 1997)
• Minimum 256K window in host memory map
• The ability to generate and accept 16-bit data transfers (VME D16) with both VME A24 standard address and VME A16 short I/O address transfers
• If interrupts are required, you will need a physical interrupt. On the 2-channel card, this will be shared between channels.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,