Rexroth Indramat Bosch Digital axis control HNC100

Features

The digital axis control HNC100 is a programmable NC control

for a closed-loop controlled axis. It meets the specific requirements

of closed-loop controlling of hydraulic drives and also offers

the possibility of controlling electrical drives.

With regard to immunity to interference, mechanical resistance

to vibration and shock, and climate-proofness, the HNC100 is

designed for use in harsh industrial environments. It conforms

with EC Directives (CE mark).

Fields of application:

– Machine tools, plastics processing machines, special machines

– Presses

– Transfer lines

– Rail-bound vehicles

Programming:

– User programming with a PC

– NC language with subprogram technique and conditional

jumps

– Own NC program for function sequences

– Local CAN bus for parameterising several HNC100

Operation:

– Comfortable administration of data on the PC

– Swift changing of data by means of hand-held control box

BB-3 (see RE 29798) or control panel BF-1 (see RE 29794)

Process interfacing:

– 8, 16 or 24 digital inputs and outputs each, Profibus DP,

CANopen or INTERBUS-S for communication with a PLC

Hydraulic axes:

– Measuring system:

• Incremental or absolute (SSI)

• Analogue 0 to ±10 V and 4 to 20 mA

• Reference voltage ±10 V

– Voltage or current control variable output

– Freely configurable controller variants

• Position controller, pressure/force controller

• Position-dependent braking

• Alternating closed-loop control (position/pressure)

• Synchronisation control for 2 axes

Further information:

– Installation instructions and interconnection diagrams

VT-HNC100-.-2X, see RE 30131-Z

Digital position transducers:

– Incremental transducer (transducer with TTL output)

• Input voltage log 0 0 to 1 V

log 1 2.8 to 5.5 V

• Input current log 0 –0.8 mA (at 0 V)

log 1 0.8 mA (at 5 V)

• Max. frequency referred to Ua 1 fmax 250 kHz

– SSI transducer

• Coding Gray code

• Data width Adjustable up to max. 28 bits

• Line receiver (TTL)

Input voltage log 0 0 to 1 V

log 1 2.8 to 5.5 V

Input current log 0 –0.8 mA (at 0 V)

log 1 0.8 mA (at 5 V)

• Line driver

Output voltage log 0 0 to 0.5 V (at 120 Ω)

log 1 2.5 to 5.5 V (at 120 Ω)

- EnDat transducer Interface in preparation

Voltge supply to position transducer by the

HNC100

U UO or +5 VDC ±5 %; max. 200 mA

Max. voltage for all input signals Umax UO –1 V (the signals are not opto-decoupled)

Dimensions (W x H x D):

– VT-HNC100-1-2X/.-08-.-. 71 x 155 x 204 mm

– VT-HNC100-2-2X/.-16-.-. and VT-HNC100-1-2X/.-24-.-. 106.5 x 155 x 204 mm

Permissible operating temperature range ϑ 0 to 50 °C

Storage temperature range ϑ –20 to +70 °C

Weight:

– VT-HNC100-1-2X/.-08-.-. m 1.0 kg

– VT-HNC100-2-2X/.-16-.-. and VT-HNC100-1-2X/.-24-.-. m 1.2 kg