PACSystems RX3i IC695CPE310

The PACSystems* RX3i CPE310 can be used to perform real time control of machines, processes, and material handling systems. The CPU communicates with the programmer via the internal Ethernet port or a serial port. It communicates with I/O and Intelligent Option modules over a dual PCI/serial backplane.

Features 

■ Contains 10 Mbytes of user memory and 10 Mbytes of non-volatile flash user memory. 

■ Battery-less retention of user memory. 

■ Optional Energy Pack on system power loss powers CPU long enough to write user memory to nonvolatile storage (NVS). 

■ Configurable data and program memory. 

■ Programming in Ladder Diagram, Structured Text, Function Block Diagram, and C. 

■ Supports auto-located Symbolic Variables that can use any amount of user memory. 

■ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32Kwords each for analog %AI and %AQ. 

■ Supports most Series 90-30 modules and expansion racks. For supported I/O, Communications, Motion, and Intelligent modules, see the PACSystems RX3i Hardware and Installation Manual, GFK-2314. 

■ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

■ Two serial ports: RS-485 and RS-232. 

■ Embedded Ethernet interface supports a maximum of two programmer connections. 

■ The rack-based Ethernet Interface module (IC695ETM001) supports a complete set of Ethernet functionality. For details, see TCP/IP Ethernet Communications, GFK-2224. 

■ Time synchronization to SNTP Time Server on Ethernet network when used with a rack-based Ethernet module (IC695ETM001) version 5.0 or later. 

■ Ability to display serial number and date code in programmer Device Information Details. 

■ Ability to transfer applications to and from USB 2.0 A-type compatible RDSDs (removable data storage devices). 

■ Compliant with EU RoHS Directive 2002/95/EC using the following exemptions identified in the Annex: 7(a), 7(c)-I and III, and 15.