KEBA I/O modules
Product features
• Up to 16 digital inputs
• 2 digital inputs with interrupt
• Electronic parameter chip
• Configurable input filte
Short description
The digital input module of the DI 2xx/x series enables the connection of 8 (DI 240/B) or 16 (DI 260/A) digital inputs.
24 V DC control signals are captured by the digital inputs and transmitted galvanically isolated to the higher-level automation
device. In addition, two digital inputs can be used as interrupt inputs.
These modules are attached directly to a CPU module or can be operated with all KEBA controls by means of bus
couplers.
Digital input modulesDI240/B: 8 digital inputsDI 26O/A: 16 digital inputs
Digital output modulesDO 242/B: 8 digital outputsDO 272/A:14 digital outputsDigital mixed modules (vo)
DM 272/A: 8 digital inputs, sink + 8 digital outputs 2 A, sourceDM 276/A: 6 digital inputs,source + 8 digital outputs 2 A, sink
Analog input modules
Al 240/A: 4 analog inputs ±10 V
Analog output modules
AO 240/A: 4 analog outputs 土10 V
Analog hybrid modules (Io)
AM 280/A: 4 analog inputs 土10V(14 bit) + 4 analog outputs ±10 V(12 bit)AM 282/A: 4 analog inputs ±10 V(16 bit)+ 4 analog outputs ±10 V(14 bit)
AM 280/B: 4 analog inputs 0-20 or 4-20 mA + 4 analog outputs O-20 or 4-20 mA
Compact modules
IM 270W: 32 digital inputs + 16 digital outputs 0.5A+24 digital outputs 2A+ 8 analogoutputs + 6 analog outputs + 8 temperature inputs for J/K/LN thermoelements + 4 SSlinterfaces
Temperature measurement modules
TM 220/A: 3 temperature inputs for J/K/L thermoelementsTM240/A: 6 temperature inputs for J/K/L thermoelementsTM 225/A: 4 temperature inputs for PT100 sensors
Positioning modules
MM 240/A: 2 incremental position encoder inputs + 2 latch inputs
Communication modules
SM 210/A: Serial interface module 2x RS232SM 220/A: Serial interface module Current LoopSM 230/A: Serial interface module 2x RS485/RS422SM 250/A: Serial interface module 4x sSl interfaceFM 265/A:PROFIBUS slave module
FX 271/B:SERCOS Ⅲl master interface module for CP 24x and CP 26xFM 200/A:CANopen interface module
