SLC 500 Digital I/O Modules
Input Catalog Numbers 1746-IA4, 1746-IA8, 1746-IA16, 1746-IB8,
1746-IB16, 1746-IC16, 1746-IG16, 1746-IH16, 1746-IM4, 1746-IM8,
1746-IM16, 1746-IN16, 1746-ITB16, 1746-ITV16, 1746-IV8, 1746-IV16
Output Catalog Numbers 1746-OA8, 1746-OA16, 1746-OAP12, 1746-OB8,
1746-OB6EI, 1746-OB16, 1746-OB16E, 1746-OBP8, 1746-OBP16,
1746-OG16, 1746-OV8, 1746-OV16, 1746-OVP16, 1746-OW4, 1746-OW8,
1746-OW16, 1746-OX8
Combination Input/Output Catalog Numbers 1746-IO4, 1746-IO8,
1746-IO12, 1746-IO12DC
Follow these steps to install the module:
1. Disconnect power.
2. Align the circuit board of module
with the chassis card guide. (A)
3. Slide the module into the chassis
until the bottom tabs lock into place.
(B)
4. Route the wires down and away from
the module, securing them with the
wire tie. (C)
5. Cover all unused slots with Card
Slot Filler, catalog number 1746-N2,
to keep the chassis free from debris.
6. To remove the module, press and
hold the module release located on
each self-locking tab, and slide the
module out of the chassis slot. (D)
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,