2VAA008148R325    ABB H&B Contronic    

Output is switched on again

Total load (together with the output currents after acknowledgement, if DIL switch No. 8 = ON automatically, if DIL switch No. 8 = OFF

of the combined inputs/outputs) max. 4 A

Labelling for the outputsSymbol names or short signal designations can be labelled on the front panel foil. The foil is not removeable.

Conductor cross section of the

removable terminal blocks max. 1.5 mm2, terminal-to-terminal distance 3.81 mm

Technical data of the configurable inputs/outputs

The 8 combined input/output channels are defined individually as inputs or outputs by the user program. This is done by reading from or writing to the corresponding channel.

Number of channels per module 8 inputs/transistor outputs

Distribution of channels into groups 1 group of 8 channels

if the channels used as inputs channels En+1,00...En+1,07

if the channels used as outputs channels An,08...An,15

Signalling of input/output statuses one yellow LED per channel,

the LEDs correspond functionally to the binary signals

3BSE074601R092

MOD 300 Eng Displays 3.7 - Basic/TCL

Product Information

3BSE074601R093

MOD 300 Eng. Displays 3.7 - Basic/TLL

3BSE074601R094

MOD 300 Eng. Displays 3.7 Basic/TCL/TLL

3BSE074601R101

MOD 300 Engineering Display 3.7 Clients

3BSE074602R03

AdvaBuild - Expansion License

3BSE074602R051

Add MOD 300 AdvBuild 3.7 Concurrent User

3BSE074602R061

AdvaBuild 3.7 CB -Expand 4 to 7 Nodes

3BSE074602R062

AdvaBuild 3.7 CB -Expand 4 to 10 Nodes

3BSE074602R063

AdvaBuild 3.7 CB -Expand 4 to >10 Nodes

3BSE074602R064

AdvaBuild 3.7 CB -Expand 7 to 10 Nodes

3BSE074602R065

AdvaBuild 3.7 CB-Expand 7 to >10 Nodes