8VZZ000854L320    ABB H&B Contronic    

● Serial interface COM2 as an MMC interface

● Additional interface for connecting communication mo-dules (e.g. 07 KP 90)

● Real-time clock

● LEDs for displaying the binary input and output signalsas well as operating conditions and error messages ●  Detachable screw-type terminal blocks

● Detachable plastic sheet on the front side of the device ;can be labelled with the signal names in order to have the inputs and outputs directly assigned

● Fastening by screws or by snapping the device on a DINrail

● The lithium battery 07 LE 90 can be put into the battery

compartment in order to

– store and back-up the user program in the RAM

– store and back-up data which is additionally containedin the RAM, e.g. the status of flags

– back-up the time and date (real-time clock)

● RUN/STOP switch for starting and aborting the programexecution

● Extensive diagnosis functions

– Self-diagnosis of the central unit

– Diagnosis of the ABB Procontic CS31 system bus andthe connected modules

– can be set as an ASCII interface for connecting peripheraldevices (e.g. MMC devices)

26390603-BX

DSTK 183 Cable Unit

26390799-A

COAX K8 Thick Coaxial Cable, Length=23.4

26390799-C

COAX K9 Thick Coaxial Cable, Length=70.2

26390799-E

COAX K10 Thick Coaxial Cable, Length=117

2PAA103651-220

OPC Data Link 2.2 Installation Guide

2PAA103652-220

OPC Data Link 2.2 Conf and Operation

3BSC170011R1

DI010 Digital Input 1 ch 24VDC isolated

3BSC170011R2

DO010 Digital Output 1 ch 24/48VDC

3BSC170011R3

DI015 Digital Input 1 ch 120VAC isolated

3BSC170011R4

DI020 Digital Input 1 ch 240VAC isolated

3BSC170011R5

DO015 Digital Output 1 ch 120VAC isolate