3BSE019818R3 ABB
enabling plate mounting.
For a cabinet assembly:
Operating temperature from 0 to 55°C, sufficient free volume around the units is required to allow the heat to dissipate correctly. It is recommended that the cabinet be fitted with a ventilation system.
Warning: Avoid placing heat generating devices next to the products (transformers, mains, power contactors, ...).
All electrical connections are effectuated through removable terminal blocks with an acceptable wire section equal to 2.5 mm2.
The tightening torque, for reference, is equal to 0.5 Nm.
Input/output cabling
Use rigid wires or multi-conductor wires AWG 18 (0.96 mm2) to AWG 14 (1.95 mm2) for the inputs and rigid wires or multi-conductor wires AWG 14 (1.95 mm2) for the outputs.
Certain precautions should be taken to reduce installation disturbances from the surroundings. E.g. the cables carrying low voltage signals should not be placed in the same sleeve as the power cables.
AM801F
AO610
AO810
AO810V2
AO810V2 3BSE038415R1
AO815
AO820
AO845
AO845A
AO845A-eA
APBU-44C
APOW-01C
ARC093AV1
ARCOL 0338
ARCOL 0339
ARCOL 0346
ASFC-01C
AX411/50001
AX670
BB510(DC5256)
BC25
BCU-01
BCU-12
C310/0020/STD
CAL16-11A
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,