Y100250-003 ABB
Unit identification for diagnosis
For diagnostic purposes, the units of the 42 series are distinguished as follows:
- Unit type: 228 07CR42
- Unit type: 229 07CT42
Installation and cabling
The 07KP53 is powered with 5 V DC by the basic unit. The connection between the 07 KP 53 and the basic unit is established with the two cables situated on the left side of the coupler. Precondition for connecting them together, it is necessary to remove the EMC plastic adhesive. Warning: The 07 KP 53 must be connected or disconnected only when the power of the basic unit is OFF.
When the 40 and 50 series are used with a 07 KP 53 MODBUS coupler, it is possible to increase the number of inputs / outputs by adding up to only 5 local extension units, instead of 6 without coupler.
PFSA140
PFSK152
PFTL 101B 2.0KN
PFTL101A 1.0KN
PFTL101A 3BSE004160R1
PFTL101A/3BSE004172R1
PFXA401SF
P-HA-RPS-32000000
PHARPS32200000
P-HA-RPS-32200000
PM150V08
PM510V16
PM511V16
PM630
PM632
PM633
PM645B
PM802F
PM820-2
PM825
PM825-1
PM856K01
PM860K01
PM861AK01
PM864AK01-eA
PM866
POW-01C
PP835A
PP836
PP836 3BSE042237R1 HW:05510A FW:1.10.162/B144.1.3(3.0)
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,