ABB EHDB130
1. Open the democase door.
2. Take out the mains cord from the case.
3. Plug in the mains cord*
4. Switch on the demo using the mains switch.
5. You can toggle control between the control panel and the IO-panel with the “Loc/Rem” –button on the control panel.
a. To change the operation macro, navigate to assistants with the “Func” – button and select “Application Marco”. Use the I/O-panel text strips to see default I/O-configurations.
Note! Option modules assistant is not supported from firmware revision AS7R7363 onwards.
6. Switch “Start Interlock” switch to “on” position to enable drive operation. See the switch location in “Lay-out of the I/O-panel” chapter in this manual.
3BSE008508R1
DI810 Digital Input 24V 16 ch
3BSE008510R1
DO810 Digital Output 24V 16 ch
3BSE008512R1
DI820 Digital Input 120V a.c. 8 ch
3BSE008514R1
DO820 Digital Output Relay 8 ch
3BSE008516R1
AI810 Analog Input 8 ch
3BSE008534R1
TB805 Bus Outlet
3BSE008536R1
TB806 Bus Inlet
3BSE008538R1
TB807 Modulebus terminator
3BSE008544R1
AI820 Analog Input 4 ch
3BSE008546R1
AO820 Analog Output 4 ch
3BSE008550R1
DI821 Digital Input 230V 8 ch
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,