ABB 61615-0-1200000
1. Open the democase door.
2. Take out the mains cord from the case.
3. Plug in the mains cord*
4. Switch on the demo using the mains switch.
5. You can toggle control between the control panel and the IO-panel with the “Loc/Rem” –button on the control panel.
a. To change the operation macro, navigate to assistants with the “Func” – button and select “Application Marco”. Use the I/O-panel text strips to see default I/O-configurations.
Note! Option modules assistant is not supported from firmware revision AS7R7363 onwards.
6. Switch “Start Interlock” switch to “on” position to enable drive operation. See the switch location in “Lay-out of the I/O-panel” chapter in this manual.
* For more information check “AC input (supply) connection” in the Technical data section
DSQC202
DSQC313
DSQC332A
DSQC336 3HNE04092-1
DSQC346B
DSQC346G
DSQC354
DSQC504
DSQC602
DSQC604
DSQC608
DSQC609
DSQC626
DSQC627 3HAC020466-001
DSQC633
DSQC679
DSQC697 DSQC658
DSTD108
DSTF610
DSU14
DTCC901B
DTDX991A
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,