ABB 5SHX2645L0004
For the digital input, one of the following protective functions can be selected via local operation.
• No function (default)
• Move to 0 % position
• Move to 100 % position
• Hold previous position
• Disable local configuration
• Disable local configuration and operation
• Disable all access (local or via PC)
The selected function is activated when the 24 V signal is no longer connected to the digital output (< 10 V DC).
The safety functions POS_0%, POS_100% and POS_HOLD run in the operating level in both types of control modes P1.0 or P1.1. BIN_CTRL is shown in the display.
If a corresponding function is active, a corresponding value is defined internally for the positioner. The actuator is then driven into the end position or position specified under consideration of the setpoint ramp, configured operating range, selected behavior.
After selecting a lock CNF_LOCK, OP_LOCK or ALL_LOCK, the key icon is displayed, indicating that the lock will be activated at the next save.
After saving and without 24V at the digital input, the key is permanently displayed.
IMASI02
IMASI03
IMASI13
IMASI23
IMASM03
IMASO01
IMASO11
IMBLK01
IMCIS02
IMCIS12
IMCIS22
IMCOM03
IMCOM04
IMCPM02
IMDSI02
IMDSI12
IMDSI13
IMDSI22
IMDSM04
IMDrSM05
IMDSO01
IMDSO02
IMDSO04
IMDSO14
IMDSO15
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,