ABB 5SGX1445H0001
DM-KEY
DM-PREM
DM-PREM-UPGR
DM-TOOL
DM-TOOL-UPGR
PM572+DM-TOOL
PM573_ETH+DM-TOOL
PM582+DM-TOOL
PM583_ETH+DM-TOOL
PM590_ETH+DM-TOOL
PM591_ETH+DM-TOOL
PM592_ETH+DM-TOOL
3套DM-TOOL
6套DM-TOOL
12套DM-TOOL
PS552-MC-ALL
PS552-MC-ONE
PS552-MC-E
PS562-SOLAR
PS563-WATER
PS553-DRIVES
PS541-HMI
PS542-WEB-PC
Test is for simulation of the analog output. The test allows you to simulate effects during commissioning without affecting the normal process.
Important
The test is automatically stopped after two minutes.
While the test is running, the corresponding message (see below) flashes in the display.
NONE no function.
FAILED Simulation of position feedback failure (CPU). I > 20.5 mA (default setting) or I < 3.8 mA (special version, modified hardware)
ALRM_CUR Simulation of an alarm current < 3.8 mA or I > 20.5 mA
CURRENT Output of the current setpoint as current value via analog output. All configurations and settings of the analog input or output must be taken into consideration.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,