ABB 5SDD1060F0001
With this parameter you determine the valve action for the analog position feedback.
Increasing = position 0 ... 100 % = signal 4 ... 20 mA
decreasing = position 0 ... 100% = signal 20 ... 4 mA
When an alarm / message is generated in the positioner, it is signaled via the digital and analog outputs. You can use the ALARM parameter to select a higher or lower alarm current for analog feedback.
Important
When there is no electrical energy, or during initialization, the output signal > 20.5 mA. In special versions (hardware modification) < 3.8 mA is also possible.
HIGH_CUR Alarm current I > 20.5 mA
LOW_CUR Alarm current I < 3.8 mA
26390603-BX
DSTK 183 Cable Unit
26390799-A
COAX K8 Thick Coaxial Cable, Length=23.4
26390799-C
COAX K9 Thick Coaxial Cable, Length=70.2
26390799-E
COAX K10 Thick Coaxial Cable, Length=117
PM581-ETH*
PM582-ETH*
PM590-ETH*
PM582*
PM572
PM573-ETH
PM582
PM583-ETH
PM590-ETH
PM591-ETH
PM591-2ETH
PM592-ETH
PM595-4ETH-F
TB511-ETH
TB521-ETH
TB523-2ETH
TB541-ETH
TA521
TA541
MC502
TA524
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,