ABB 408368B IAM MODULE
3BSE003575R1
SA161K01 Expansion Power Supply Unit.
3BSE003576R1
SA162K01 Expansion Power Supply Unit.
3BSE003577R1
SA167K02 Expansion Power Supply Unit.
3BSE003578R1
SA168K02 Expansion Power Supply Unit.
3BSE003581R1
SA161K02 Red.Power Supply for I/O-Subrac
3BSE003582R1
SA162K02 Red.Power Supply for I/O-Subrac
3BSE003583R1
SA167K04 Red.Power Supply for I/O-Subrac
3BSE003584R1
SA168K04 Red.Power Supply for I/O-Subrac
3BSE003586R1
DSSA 150AK07 Expansion Power Supply Unit
3BSE003588R1
DSSA 150AK09 Red. Power Supply for I/O
3BSE003827R1
CI532V02 MODBUS Interface, 2 ch
3BSE003829R1
CI532V04 Allen-Bradley DF-1 interf, 2 ch
The parameter DB_APPR specifies the speed at which the dead band is approached.
In rare cases, overshooting can occur when the valve position is controlled. This can be prevented by reducing the speed of the dead-band approach.
The test is used to activate the controller, and you can check the effects of the changes to this parameter group, e.g., by introducing setpoint changes or setpoint ramps using a current source.
Normally, INACTIVE is shown in the display. To start the test, press and hold ENTER until the countdown from 3 to 0 is finished.
The test is activated. The display shows the control loop symbol and a flashing message. The test is automatically stopped after two minutes and can also be stopped by pressing any button.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,