ABB 3HAC17484-9/02
You use this parameter to specify the end position to which the reset spring of the pneumatic actuator drives the valves and fittings in the event that the auxiliary power fails.
The corresponding end stop is determined during Autoadjust. If, however, only the control parameters are determined (STANDARD, see parameter ADJ_MODE), the spring action must be entered manually.
Select the direction of rotation of the sensor shaft (looking at the open housing), if the device is in safe position as a result of the spring force (actuator exhausts via OUT1). For double-acting actuators, the spring action has the same effect as ventilating pneumatic output OUT2.
CLOCKW Stop reached turning clockwise
CTCLOCKW Stop reached turning counterclockwise
3BUR000745R1
DSSB170K08 Energy Reserve 24VDC for CPU
3BUR000746R1
DSSB170K09 Energy Reserve 24VDC for I/O
3BUR000846R1
SA167K11 RM500V1 Power 120V/25A/1,4m
3BUR000847R1
SA167K12 RM500V1 Red Power 120V/25A/1,4m
3BUR000848R1
SA168K11 RM500V1 Power 230V/25A/1,4m
3BUR000849R1
SA168K12 RM500V1 Red Power 230V/25A/1,4m
3BUR000888R1
CE-marking Loose Parts Delivery
3BUR001285R2
AC460A02 System Unit for RM5xx Cabinet
3BUR001286R2
AC460B02 System Unit for Rittal Cabinet
3BUR001454R1
DI814 Digital Input 24V Current 16 ch
3BUR001455R1
DO814 Digital Output Current 16 ch
3BUR001516R1
AdvaControl Basic Software License for
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,