ABB 3ASC25H209
CP620
CP630
CP635
CP650
CP651
CP660
CP661
CP665
CP675
CP676
CP620-WEB
CP630-WEB
CP635-WEB
CP650-WEB
CP651-WEB
CP660-WEB
CP661-WEB
CP665-WEB
CP675-WEB
CP676-WEB
RUN Autoadjust is running.
CALC_ERR Error during plausibility check.
COMPLETE Autoadjust completed successfully.
BREAK Autoadjust has been stopped by the operator. This can be done locally by pressing ENTER.
OUTOFRNG Sensor range of the positioner has been exceeded; Autoadjust was stopped.
NO_SCALE End positions have not yet been determined; therefore, partial Autoadjust cannot be run.
RNG_ERR Less than 10% of the sensor range is used.
TIMEOUT Timeout. The control parameters could not be determined within 200 seconds. Autoadjust was stopped.
SPR_ERR The actual spring action does not match the configured direction.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,