ABB 086318-002
Switching to the configuration level
1. Simultaneously press and hold the or buttons.
2. Press ENTER once and release it again. Press and hold ↑ and ↓ until the countdown from 3 to 0 is complete (duration: approx. 3 seconds).
Important
If you release the direction buttons before the countdown is complete, the configuration level will not be activated.
3. Release the or buttons. The configuration level appears. The first parameter (ACTUATOR) of group 1 (STANDARD) is displayed. The configuration symbol is also shown on the display.
M063B
M2004HW
MB510
MP3-11W
MSR04X1
MSR04XI
MVR 0.44-10KA
NAIO-03
NCNA-01
NDBU-95C
NKST11-15
NPBA-12
NPCT-01C
NTAC-02
NU8976A
NU8976A99
PCC322BE
PCD230A
PCD231B
PCD235A101
PCD244A101
PDD200A101
PDD205A0121
PDD500A101
PE1315A
PFCL201C 20KN
PFEA111/112
PFEA111-65
PFEA112-20
PFEA112-65
PFEA113-20
PFSA140
PFSK152
PFTL 101B 2.0KN
PFTL101A 1.0KN
PFTL101A 3BSE004160R1
PFTL101A/3BSE004172R1
PFXA401SF
P-HA-RPS-32000000
PHARPS32200000
P-HA-RPS-32200000
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,