ABB 07AC91D
AI523
AI531
AO523
AX521
AX522
DA501
CD522
TU515
TU516
TU531
TU532
DC551-CS31
CI592-CS31
CI590-CS31-HA
TU551-CS31
TU552-CS31
CI541-DP
CI542-DP
TU510-DP
CI581-CN
CI582-CN
TU518-CNDN
CI501-PNIO
CI502-PNIO
CI511-ETHCAT
CI512-ETHCAT
TU507-ETH
TU508-ETH
CI504-PNIO
CI506-PNIO
1. Open the democase door.
2. Take out the mains cord from the case.
3. Plug in the mains cord*
4. Switch on the demo using the mains switch.
5. You can toggle control between the control panel and the IO-panel with the “Loc/Rem” –button on the control panel.
a. To change the operation macro, navigate to assistants with the “Func” – button and select “Application Marco”. Use the I/O-panel text strips to see default I/O-configurations.
Note! Option modules assistant is not supported from firmware revision AS7R7363 onwards.
6. Switch “Start Interlock” switch to “on” position to enable drive operation. See the switch location in “Lay-out of the I/O-panel” chapter in this manual. * For more information check “AC input (supply) connection” in the Technical data section.
Region Email:
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,