Connecting cable between sensor and module "OK" (no short circuit or open circuit);
The supply voltage of the system is within the preset range;
The state of the module/sensor is output through the optocoupler, and its maximum load is: U=48V DC; I = 100 ma.
Limit testing:
For dual channels, the eigenvalue of channel 1 is monitored by yellow alarm light, and that of channel 2 is monitored by red alarm light. In single-channel mode, the limit value can be set, such as yellow light for alarm and red light for danger.
Limits adjustment range: 0... * Full scale.
Output of optocoupler: UMAX =48V DC; Imax = 100 ma.
Cable length: PR 6423/000-000; PR 6423/100-000; PR 6423/010-000
Direct connection of PR 6423 with Lemo - plug to the following MMS 3000 transmitters: MMS 3110 MMS 3210 MMS 3311
PR6424/013-121
PR6424/014-000
PR6424/014-121
PR6424/015-000
PR6424/015-121
PR6424/016-000
PR6424/016-121
PR6424/017-000
PR6424/017-121
PR6424/018-000
PR6424/019-021
PR6424/111-100
PR6424/111-021
PR6424/112-100
PR6424/112-021
PR6424/113-100
PR6424/113-021
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat/Whatsapp)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,