RMTE I/O - SCANPRT MNT INFCE 1203-GD1
Remote I/O (115/230V AC Powered)
Bulletin 1203
Serial Communications Module
Chapter 1 provides an overview of the Remote I/O communications module (1203-GD1 module, 1203-GK1 module, and 1336-GM1 board). In this chapter, you will read about the following:
• Function of the module.
• Features of the module.
• Compatible SCANport products and programmable controllers.
• Parts and hardware of the module.
• Steps for setting up the module.
• Required tools and equipment
The 1203-GD1 module, 1203-GK1 module, and 1336-GM1 board let you connect SCANport products to Remote I/O links and devices. These modules feature the following:
• DIP switches let you configure how the Remote I/O module operates before connecting it to the link.
• User-configurable fault action DIP switches let you customize the module actions when communication errors occur.
• LEDs report link, module, and SCANport product health.
• Datalinks are supported in the module. Datalinks are a SCANport mechanism for transferring information between a controller and SCANport device. Each enabled datalink uses two words in the I/O image table unless it is truncated.
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2025 Copyrighted
Phone(WeChat/Whatsapp)
+086-181 4410 0983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,