Energy and Environmental
  • Products related to categories: servo, frequency conversion, HMI, driver, distributed DCS, IPC (PC bus industrial computer), PLC (programmable control system), DCS (distributed control system), FCS (field bus system), robot and other products and technical services.
  • Applications: Wind energy, automobile, ship, transportation, manufacturing, aviation, petroleum, natural gas, thermal power, thermal power, nuclear energy, steel, metallurgy, mining, power and other industries



Register Forgot password?
  • Singapore New Energy Corporation
  • Geylang Bahru Industrial Estate
  • การทางหลวงแห่งประเทศไทย
  • American Petroleum Group
  • Indian shipping works
  • Pakistan Gas Company
  • Russian Automotive Industry Corporation
  • Brazilian Mining Company
  • Bangladesh Hydro power Plant
  • Egyptian Iron and Steel Manufacturing Co
  • Groupe d’exploitation du métro français
  • Für meinen vater
  • BYD
  • Mongolia Wind Farm
  • Empresa venezolana de procesamiento de petróleo
  • alibaba
  • Sichuan Huayingshan Power Plant
  • Huadian Datong Power Plant
  • Guodian Shuangyashan Power Generation Co., Ltd.
  • Baosteel Group Xinjiang Bayi Steel Co., Ltd.
  • Guodian Changzhou Power Plant
  • Xingtai Iron and Steel Co., Ltd.
  • Guodian Fee County Power Generation Co., Ltd.
  • Yangzhou Second Power Plant
  • Sichuan Jintang Power Plant
  • Xingcheng Special Steel Co., Ltd.
  • Quzhou Yuanli Metal Products Co., Ltd.
  • Zijin Mining Group
  • (Bangladesh) Metro Construction Company
  • WuHan steel co., ltd.
  • MaAnShan  steel co., ltd.
LAUER PCS 009, PCS 090, PCS 095, PCS 095.1 PCS 091
Source:LAUER | Author:kongjiang | Published time: 2022-09-27 | 989 Views | Share:
LAUER PCS 009, PCS 090, PCS 095, PCS 095.1


LAUER  PCS 009, PCS 090, PCS 095, PCS 095.1

Machine operation using 8 (PCS 009, PCS 090) or 16 (PCS 095, PCS 095.1)

freely assignable keys. These F01 to F08/F16 labeled keys can be application

specifically inscribed and are provided to the controller as status bits.

n Machine operation using 4 (PCS 009), 16 (PCS 090) or 32 (PCS 095, PCS

095.1) freely usable LEDs. These can be assigned the indicating states ON,

DARK, FLASHING, and INVERSE FLASHING. A green and a yellow LED is allocated

to each function key.

n Display of fixed texts with integrated variable values. The values can be

represented selectably as numerical values or in text format.

n Representation of the contents of 233 words as variables. In addition, 650

external variables can be defined. 9 variable formats (from bit to timer) are


n 3 text groups, 128 operating texts as menu and idle texts, 128 message texts

with up to 332 lines, 5 help texts with up to 32 lines.

n 127 menus with 255 menu nodes each for any menu configurations.

n 4 different deletion modes. For every message, 1 of 4 possible deletion modes

can be selected.

n Modification of the content of any word within the transfer area. Using the

integrated editor all possible representation formats can be setup.

n 7 priority levels for idle text up to help text, 3 message priorities Information,

Warning, Fault. This working-condition related management significantly offloads

the programmable controller program.

n Monitoring of rising or falling edges of 128 consecutive bits. The assignment

of texts, the manage-ment of 3 priority levels (Information, Warnings, and Faults),

keeping the timely sequence as much as possible, organization of the FIRST

MESSAGE, LAST MESSAGE, and CYCLIC DISPLAY, the individually settable deletion

behaviour, and the representation formats NORMAL and FLASHING are tasks

which are managed by the PCS by itself.

n Communication monitoring (wire-break, short circuit). A very efficient data

transfer is secured by the integrated priority management in connection with the

intelligent package length optimization, the high thruput rate and the fault tolerance.

The variable range is between word W30 and maximum word W255. If this area is not sufficient, then the

extension area can also be used (PCS 009, PCS 090: W23...W29 and PCS 095, PCS 095.1: W26...W29). This

area is however intended for necessary modifications and therefore is to be used with care (PLC programming!).

If all messages are not required, then the words 15...22 can be used for the variables.

More detailed information about the various variable types can be found in the chapter "VARIABLES/TEXTS/


Before the exchange of data, every variable set and actual value must be written in the corresponding words.

After the data exchange only the set values must be read back from the respective words.

It is recommended to address variables of the same display page in packets! This also saves PLC cycle time.

The addressing order to the individual variables occurs by programming (PCSPRO ) of PCS 090, PCS 095, PCS


The variable formats STRING, CSTRING, BCD, BIN, WORD and ASCII use the words right aligned and ascending,

e.g., BIN-2 on W30...W31 (W30 is HIGH word and W31 is LOW word). The format bit can be used on every

individual bit (in order to use every 16 bit in a bit-by-bit manner, 16 bit variables have to be declared). One and

the same word can be source and target for several variables even with different format. As a set value, it is

recommended to only allot one variable format to a word. One or more actual value variables with differing

formats can however at the same time be allocated to this word.

Leading and non used bits in the set values of the types STRING, CSTRING, BCD(0)-1 (length 1...3) and BCD(0)-

2 (lengths 1...7) are ignored on reading and on writing back they are set at 0 in the PLC. The type bit only changes

the currently addressed bit!

Set values should be occupied as far as possible corresponding to their permitted min-/max-values, before the

new start, as they are required as a standard value on which to base the editing. If they are outside the min-

/max area, then inverse displays will be presented in the display. As set values, they can first be relinquished

after correction procedure.

With a 32 bit variable, the word with the lower number is the higher valued word, and the word with the higher

number is the lower valued word.

Variables of the type BIT and CSTRING are written into the PLC immediately after their adjustment. All the others

are written first after ENT or on leaving the variable range.

  • MOTOROLA MVME187 RISC Single Board Computer Installation Guide
  • ABB ADM-System 16-Channel Analog conversion interface new
  • Табло ABB 3ASC25H209 DATX110 3BSC980004R784
  • 5X00658G01 Ovation™ Digital Excitation Controller, Electronics Module
  • ABB 3BHE024313R0101 KS D211 A101 power Board Module KSD211